Technology and design of single-cut molds


Certificate none
Registered since: 2011-07-29 10:56:01

Technology and design of single-cut molds

Addressed to

Head of an enterprise

Technical Director

Chief engineer

Dear Sirs,

This is a question of "know-how" integration into your enterprise. It is an absolutely new and non-licensed technology (the licensor has not yet filed on its purpose and therefore a "Licensee" may patent these inventions to his name ...). These single-cut molds of most various shapes and sizes are widely used for production of various products (including curved elements paving, roads and sidewalks - in the form of paving, unlimited number of shapes, colors and sizes; elements of landscape architecture; curbs etc.).

The offering "know-how" has the following advantages (it is widely used around the world in comparison with traditional technology and design):

1) Persistence of molds (high operating cycle rate). Is increased from 60.0 - 80.0 thousand up to 1.0 million of cycles.

2) Self cost is reduced by 15-30%.

3) The following operations of traditional technologies are canceled : cementation (24-25 hours), machine working (including after cementation), hardening, tempering ...

4) Thus molds quality gets improved also because "leashes" and other heat treatment defects are excluded.

5) Productivity is increased because of the section 3 of "unnecessary operations" which is excluded and thus it causes releasing of workers (from "annihilated operations").

6) Manufacturing area and equipment are released: cementation furnaces, quenching, tempering ..., and leading to reduction of capital costs.

7) Electricity and gas economy ...

8) The design of molds are greatly simplified

Transfer of the know-how is performed by the Licensor on the basis of a model license agreement (a draft is attached) with the assurance of the parameters....

On the basis of a separate agreement the Licensor may participate in the full range of work: from development of objectives and ending of all works with the "turnkey".


Odessa, Ukraine, Yuri Nikolayevich Mashnevu (an author of 50 scientific papers published in the Soviet Union, U.S., India and 12 inventions 9 of which are of classified information... .)

Phone +38-067-744-30-79; / 0482 / 399-101.


Sincerely yours,

Mashnev J.N.


Project type: Creation of the a enterprise, start-upType of investment(s): The buyer of the projectProject status: The business plan, the feasibility reportPayback: 12 month
Comments may leave only registered users. Login or register !
23 June 2013
Responsible for investment structure between particular we proposon our services: -Project Funding -Loan Offer I have nearly 38 years of experience between individuals.   Open to any loan application and investment.   Do not hesitate to contact me for more information, I remain at your disposal by email. gabrieledou@yahoo.fr
28 October 2013
As a consultant, an heir pledged in London, investor has a large sum of money to invest in partnership with a foreign company or participate in the share capital of a company carrier of profitable project (SMBS) or inject funds in any gainful activity: industrial, mining, real estate, hospitality, telecom, transportation.. .etc For good start, if you are interested contact its consultant address email: lefiduciaire@outlook.com for ample details for the investment procedure so that I will give you the investor contact in London. NICOLAS. W. (Consultant) +22997984083